a. Press until >FAX appears, and then press .b. Press until >Speed Dial apc. Use the uttons to enter the three-digit speed dial number between 001 and20 the number keypad, and then press .The corresponding entry's name brief ays. To confirm the name again, press.3. Adjust the document resolution to suit your s (see "Adjusting the DocumentResolut(See 18.)").If you need to change the contrast, see "er/Darker(See 18.)".4. The doc into the memory.When the docume d on the document feeder glass, the LCD display asks if you wantanother page. Press to select Yes to a documents or to select No t sending the faximmediately, and then press .5. The fax number stored in the speed dial location is autom dialed. The document issent when the remote fax machine answers.NOTE: Using the ) in the first digit, you can send a document to multiple locatioexample, if you enter 00*, you can send a document to the locations ed between 001and 009.Group DialingIf you frequently send the nt to several destinations, you can create a group of these destind set them under a two-digit group dial location. This enables you group dial numbersetting to send the same document to all the des in the group.NOTE: You cannot include one ial number within another group dial number.Setting Group Dial1. Press until >FAX and then press .2. ss unti >Add PhoneBook Entry appears en press3. Press unt >Group Dial appears, and th .4. Enter digit speed dial number between 1 and 6, using the number keypad, an ress.If a num lready stored in the location you chose, the display shows the numbe owyou to change it. To start over with another speed-dial number Back.5. Enter the ou want to store using the number keypad, and then press .To insert a pause between numbers, press Pause. "-" appears on the display.6. To assign a name to the number, enter e. For details about how to enter names, see"Using the Number Keypad to Enter Characters(See 18.)".I o not want to assign a name, skip this step.
