3 - 208Chapter 3 Removal and Replacement Procedures (RRPs)Version 1 2006.11.28Replacement 63 LEFT COVER (PL13.1.10)1) Insert the front side of the LEFT COVER between the FRONT COVER and the printer, andmate the two front side hooks of the LEFT COVER with the printer.2) Mate the mounting hole on the front side of the LEFT COVER with the boss of the printer,and then insert the backside hook on the rear side of the LEFT COVER into the hole of theprinter.When performing the step described below, take care to check the screw type. Thescrews (silver, tap, 6mm) are used to secure the rear side of the LEFT COVER.3) Secure the LEFT COVER to the printer using the two screws (silver, tap, 10mm) and the twoscrews (silver, 6mm).Go to the next replacement step:Replacement 64 COVER POLE L (PL13.1.11)Gnb03209KA3)3)3)3)1)-11)-1 1)-12)-12)-22)-21)-2
