Dell 5230dn Mono Laser Printer Service Manual

Also see for 5230DN: Quick reference guide User guide Specifications

Contents

Dell 5230dn Mono Laser Printer Service Manual Manual pdf 200 page image

2-166 Service ManualSkewThe printed image is not paralleled with both sides of the media.7 Perform a print test.Does the problem remain?Contact nexthighest level oftech support.Problem solved.Step Check Yes No1 Check printer installation placement.Check the installation surface for irregularities.Check for damaged printer caster.Is the setup surface normal?Go to step 2. Correct theinstallationplacement.2 Properly load media into the media tray assembly andensure all guides are set correctly.Properly install the media tray assembly into the printer.Re-print the defective image.Does the error continue?Go to step 3. Problem solved.3 Check for obstructions in the area of the media feedunits.Are the media feed unit assembly free from anyobstructions?Go to step 4. Removeobstructions.4 Check the transfer roll assembly for contamination andwear.Is the above component free of excess wear andcontamination?Go to step 5. Replace thetransfer rollassembly.Go to “Transferroll assemblyremoval” onpage 4-80.Step Check Yes NoLeading edgeTrailing edge