Use ToEdit Access ControlsAdministrative MenusFunction AccessManagementSolutionsCancel jobs at the DeviceControl access to printer menus, firmware updates, held jobs, and other accesspoints.Miscellaneous Security Settings menuUse ToLogin RestrictionsLogin failuresFailure time frameLockout timePanel Login TimeoutRemote Login TimeoutLimit the number and time frames of failed login attempts from the printer controlpanel before all users are locked out.Notes:• “Login failures” specifies the number of failed login attempts before users arelocked out. Settings range from 1 to 10 attempts is the factory default setting.• “Failure time frame” specifies the time frame during which failed loginattempts can be made before users are locked out. Settings range from 1 to 60minutes. 5 minutes is the factory default setting.• “Lockout time” specifies how long users are locked out after exceeding thelogin failures limit. Settings range from 1 to 60 minutes. 5 minutes is thefactory default setting. 1 indicates the printer does not impose a lockout time.• “Panel Login Timeout” specifies how long the printer remains idle on theHome screen before automatically logging the user off. Settings range from 1to 900 seconds. 30 seconds is the factory default setting.• “Remote Login Timeout” specifies how long a remote interface remains idlebefore automatically logging the user off. Settings range from 1 to 120seconds. 10 minutes is the factory default setting.Security Reset JumperAccess controls=”No Security”No EffectReset factory security defaultsChange the value of the security settings.Notes:• Access controls=”No Security” retains all the security information that the userhas defined. “No Security" is the factory default setting.• “No Effect” means the reset has no effect on the device’s securityconfiguration.• “Reset factory security defaults” deletes all security information that the userhas defined, and assigns the factory default value to each setting in theMiscellaneous Security Settings section of both the panel and the EmbeddedWeb Server.Understanding the printer menus 173
