Finishing menuUse ToSides (Duplex)1 sided2 sidedSpecify whether two‑sided (duplex) printing is set as the default for all print jobs.Notes:• “1 sided” is the factory default setting.• You can set two‑sided printing from the software program.For Windows users:Click File > Print, and then click Properties, Preferences, Options, or Setup.For Macintosh users:Choose File > Print, and then adjust the settings from the print dialog andpop‑up menus.Duplex BindingLong EdgeShort EdgeDefine the way duplexed pages are bound and printed.Notes:• Long Edge is the factory default setting.• Long Edge assumes binding along the long edge of the page (left edge forportrait and top edge for landscape).• Short Edge assumes binding along the short edge of the page (top edge forportrait and left edge for landscape).Copies1–999Specify the default number of copies for each print job.Note: 1 is the factory default setting.Blank PagesDo Not PrintPrintSpecify whether blank pages are inserted in a print job.Note: Do Not Print is the factory default setting.Collate1,1,1 ‑ 2,2,21,2,3 ‑ 1,2,3Stack the pages of a print job in sequence when printing multiple copies.Notes:• “1,1,1 ‑ 2,2,2” is the factory default setting.• “1,2,3 ‑ 1,2,3” stacks the print job in sequence.Separator SheetsOffBetween CopiesBetween JobsBetween PagesSpecify whether blank separator sheets are inserted.Notes:• None is the factory default setting.• Between Copies inserts a blank sheet between each copy of a print job ifCollate is set to “1,2,3 ‑ 1,2,3.” If Collate is set to ”1,1,1 ‑ 2,2,2,” then a blankpage is inserted between each set of printed pages, such as after all page 1'sand after all page 2's.• Between Jobs inserts a blank sheet between print jobs.• Between Pages inserts a blank sheet between each page of a print job. Thissetting is useful when printing transparencies or when inserting blank pages ina document.Understanding the printer menus 212
