Use ToSeparator SheetsOffBetween CopiesBetween JobsBetween PagesSpecify whether to insert blank separator sheets.Notes:• Off is the factory default setting.• Between Copies inserts a blank sheet between each copy of a print job if Collate is set to“1,2,3 ‑ 1,2,3.” If Collate is set to “1,1,1 ‑ 2,2,2,” then a blank page is inserted betweeneach set of printed pages, such as after all page 1's and after all page 2's.• Between Jobs inserts a blank sheet between print jobs.• Between Pages inserts a blank sheet between each page of the print job. This setting isuseful when printing transparencies or when inserting blank pages in a document .Separator Sheet SourceTray [x]Manual FeederSpecify the paper source for separator sheets.Note: Tray 1 is the factory default setting.Blank PagesDo Not PrintPrintSpecify whether to insert blank pages in a print job.Note: Do Not Print is the factory default setting.Print SettingsSetup menuUse ToPrinter LanguagePCL EmulationPS EmulationSet the default printer language.Notes:• PS Emulation is the factory default printer language.• Setting a printer language as the default does not prevent asoftware program from sending print jobs that use anotherprinter language.Job WaitingOnOffSpecify that print jobs be removed from the print queue if theyrequire unavailable printer options or custom settings. They arestored in a separate print queue, so other jobs print normally. Whenthe missing information or options are obtained, the stored jobsprint.Notes:• Off is the factory default setting.• This menu appears only when a printer hard disk is installed.This requirement ensures that stored jobs are not deleted ifthe printer loses power.Understanding the printer menus 210
