Auto Reset 45 seconds1 minute2 minutesSets the amount of time before the printer automaticallyresets the settings on the operator panel to the defaultswhen no additional settings are made.3 minutes4 minutesFault Time-out 0Available Range: 3–300 secondsSets the amount of time the printer waits before cancelinga job when the job stops abnormally.Job Time-out 0Available Range: 5–300 secondsSets the amount of time the printer waits for additionaldata from the computer before it cancels the job.Date & Time Time Zone Sets the time zone.Set Date Sets the date.Set Time Sets the time. You can select AM or PM when TimeFormat is set to 12 Hour.Date Format Sets the date format.Time Format Sets the time format in 24 Hour or 12 Hour.Audio Tone Control PanelToneOff Does not emit a tone when the operator panel input iscorrect.On Emits a tone when the operator panel input is correct.Invalid Key Tone Off Does not emit a tone when the operator panel input isincorrect.On Emits a tone when the operator panel input is incorrect.Machine ReadyToneOffOnDoes not emit a tone when the printer becomes ready.Emits a tone when the printer becomes ready.Job CompletedToneOffOnDoes not emit a tone when a print job is complete.Emits a tone when a print job is complete.Fault Tone Off Does not emit a tone when a job ends abnormally.On Emits a tone when a job ends abnormally.Alert Tone Off Does not emit a tone when a problem occurs.On Emits a tone when a problem occurs.Out of Paper AlertToneOffOnDoes not emit a tone when the printer runs out of paper.Emits a tone when the printer runs out of paper.Low Toner AlertToneOffOnDoes not emit a tone when the toner is low.Emits a tone when the toner is low.Auto Clear AlertToneOff Does not emit a tone before the printer performs autoclear.On Emits a tone 5 seconds before the printer performs autoclear.mm / inch Millimeters(mm)Inches(")Selects millimeter or inch as the default measurementunit.Default Paper Size A4 (210x297mm) Sets the default paper size.Letter (8.5x11")Understanding the Tool Box Menus152
