Google Cloud Print Disable* Disables Google Cloud Print.Enable Enables Google Cloud Print.*1 HTTP-SSL/TLS feature is available only when a digital certificate is set from the Dell Printer Configuration Web Tool.IP FilterNOTE: IP Filter feature is available only for LPD or Port9100 .Purpose:To block data received from certain IP addresses through the wired or wireless network. You can set up to five IPaddresses. The change becomes effective after the printer is turned off and then on again.Values:No. n / IP Address (n is 1–5.) Sets the IP address for Filtern.No. n / Mask (n is 1–5.) Sets the address mask for Filtern.No. n / Mode (n is 1–5.) Off* Disables the IP Filter feature for Filtern.Accept Accepts an access from the specified IP address.Reject Rejects an access from the specified IP address.IEEE 802.1xNOTE: IEEE 802.1x feature is available only when the printer is connected using LAN cable and it is available only when the IEEE802.1x authentication is enabled.Purpose:To disable IEEE 802.1x authentication. The change becomes effective after the printer is turned off and then onagain.Reset LANPurpose:To initialize wired network data stored in non-volatile memory (NVM). After executing this function and rebootingthe printer, all wired network settings are reset to their default values.Delete All CertificatesPurpose:To delete all certificates of the printer. After executing this function and rebooting the printer, all certificates aredeleted.Understanding the Printer Menus176
