Add-CR The CR command is added.CR=CR, LF=CR-LF, FF=CR-FFCR-XX The CR and LF commands are added.CR=CR-LF, LF=CR-LF, FF=CR-FFDefault ColorPurpose:To specify the color mode to Color or Black. This setting is used for a print job that does not specify a print mode.Values:Black* Prints in the black and white mode.Color Prints in the color mode.Ignore FormFeedPurpose:To specify whether to ignore blank pages that only contain Form Feed control codes.Values:Off* Disables the Ignore Form Feed feature.On Enables the Ignore Form Feed feature.PDFUse the PDF menu to change printer settings that only affect the PDF jobs.NOTE: Values marked by an asterisk (*) are the factory default menu settings.QuantityPurpose:To specify the number of copies to print.Values:1* Sets the value in increments of 1.Available Range: 1–9992 Sided PrintPurpose:To specify whether to print on both sides of a sheet of paper.Value:1 Sided * Prints on one side of a sheet of paper.Flip on Long Edge Prints on both sides of a sheet of paper to be bound by long edge.Flip on Short Edge Prints on both sides of a sheet of paper to be bound by short edge.Understanding the Printer Menus168
