System SetupBy using the System Setup screen, you can configure the BIOS settings, iDRAC settings, and devicesettings of your system.NOTE: Help text for the selected field is displayed in the graphical browser by default. To view thehelp text in the text browser, press F1.You can access system setup by using two methods:• Standard graphical browser — The browser is enabled by default.• Text browser — The browser is enabled by using Console Redirection.Viewing System SetupTo view the System Setup screen, perform the following steps:1. Turn on, or restart your system.2. Press F2 immediately after you see the following message:F2 = System SetupNOTE: If your operating system begins to load before you press F2, wait for the system to finishbooting, and then restart your system and try again.System Setup detailsThe System Setup Main Menu screen details are explained as follows:Option DescriptionSystem BIOS Enables you to configure BIOS settings.iDRAC Settings Enables you to configure iDRAC settings.The iDRAC settings utility is an interface to set up and configure the iDRACparameters by using UEFI (Unified Extensible Firmware Interface). You can enableor disable various iDRAC parameters by using the iDRAC settings utility. For moreinformation about this utility, see Integrated Dell Remote Access Controller User’sGuide at Dell.com/idracmanuals.Device Settings Enables you to configure device settings.Entering System Setup1. Turn on, or restart your system.2. Press F2 immediately after you see the following message:F2 = System SetupIf your operating system begins to load before you press F2, wait for the system to finish booting,and then restart your system and try again.28
