Dell DL1300 Owner's Manual

Contents

Dell DL1300 Owner's Manual Manual pdf 79 page image

2. Follow the procedure listed in the Before working inside your system section.3. Remove the expansion card riser.Steps1. Locate the expansion card connector on the riser.2. Holding the expansion card by its edges, position the card so that the card connector aligns with theconnector on the expansion card riser.3. Align the expansion card bracket with the hooks on the chassis.4. Insert the card connector into the expansion card riser connector until the card is firmly seated.NOTE: Ensure that the expansion card is properly seated along the chassis, so that expansioncard latch can be closed.5. If required, connect the cables to the expansion card.Next steps1. Install the expansion card riser.2. Follow the procedure listed in the After working inside your system section.Related LinksBefore working inside your systemAfter working inside your systemSafety instructionsiDRAC port card (optional)The iDRAC port card consists of a SD vFlash card slot and an iDRAC port. The iDRAC port card is used foradvanced management of the system. An SD vFlash card is a Secure Digital (SD) card that plugs into theSD vFlash card slot in the system. It provides persistent on-demand local storage and a customdeployment environment that allows automation of server configuration, scripts, and imaging. It emulatesUSB device(s). For more information, see the Integrated Dell Remote Access Controller User's Guide atDell.com/esmmanuals.The iDRAC port card consists of the SD vFlash card slot and an iDRAC port. The iDRAC port card featuresa dedicated NIC port and is used for remote, advanced management of the system through the network.An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the iDRAC portcard. It provides persistent on-demand local storage and a custom deployment environment that enablesautomation of server configuration, scripts, and imaging. It emulates a USB device. For more information,see the Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.Removing the optional iDRAC port cardPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.1. Follow the safety guidelines listed in Safety instructions section.2. Follow the procedure listed in the Before working inside your system section.3. Keep the Phillips #2 screwdriver ready.79