Related LinksRemoving the optional front bezelRemoving the system coverSafety instructionsRecommended toolsYou need the following tools to perform the removal and installation procedures:• Key to the bezel lock.This is needed only if your system includes a bezel.• Phillips #2 screwdriver• Plastic scribe• Wrist grounding strapAfter working inside your systemPrerequisitesFollow the safety guidelines listed in the Safety instructions section.Steps1. Install the system cover.2. If applicable, install the system into the rack.For more information, see the Rack Installation placemat at Dell.com/poweredgemanuals.3. If removed, install the optional front bezel.4. Reconnect the peripherals and connect the system to the electrical outlet.5. Turn on the system, including any attached peripherals.Related LinksInstalling the optional front bezelInstalling the system coverFront bezel (optional)The front bezel is attached to the front side of the server and prevents accidents while removing the harddrive or when pressing the reset or power button. The front bezel can also be locked for additionalsecurity.Installing the optional front bezelPrerequisitesFollow the safety guidelines listed in the Safety instructions section.Steps1. Locate and remove the bezel key.NOTE: The bezel key is attached to the back of the bezel.2. Hook the right end of the bezel onto the chassis.3. Fit the free end of the bezel onto the system.50
