46 Removing and Installing Partsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m1 CD or DVD driveactivity lightThe drive activity light is on when the computer reads data from the CD or DVDdrive.2 CD or DVD eject button Press to eject your CD from the CD or DVD drive.3 floppy-drive eject button Press to eject a disk from the floppy drive.(On computers with an optional floppy drive.)4 hard-drive activity light The hard-drive light is on when the computer reads data from or writes data to thehard drive. The light might also be on when a device such as your CD player isoperating.5 headphone connector Use the headphone connector to attach headphones and most speakers forlistening to all sounds in your computer, including your CD player and systemsounds such as beeps.6 USB 2.0 connectors (2) Use the front USB connectors for devices that you connect occasionally, such asjoysticks or cameras.It is recommended that you use the back USB connectors for devices that typicallyremain connected, such as printers and keyboards.7 power button Press to turn on the computer.NOTICE: To avoid losing data, do not use the power button to turn off the computer.Instead, perform an operating system shutdown.8 power light The power light illuminates and blinks or remains solid to indicate different states.For more information, see page 28.9 floppy-drive activitylightThe floppy-drive light is on when the computer reads data from or writes data tothe floppy drive. Wait until this light turns off before you remove the floppy diskfrom the drive.(On computers with an optional floppy drive.)10 CD or DVD volumecontrol dialMove the dial to adjust the volume of your CD or DVD disc.11 CD or DVD headphoneconnectorUse the headphone connector to attach headphones to the CD or DVD drive.Your headphones won’t work if the drive is operating in digital mode. To disabledigital mode, see "No sound from headphones" on page 32.12 service tag The tag is used to identify your computer when you access the Dell Supportwebsite or call technical support.