Removing and Installing Parts 1118 Right-click the My Computer icon and click Properties.9 Click the General tab.10 To verify that the memory is installed correctly, check the amount ofmemory (RAM) listed.Removing MemoryCAUTION: Before you begin any of the procedures in this section, follow thesafety instructions in the Product Information Guide.CAUTION: Before removing memory, you must remove the PCI Express x16 card.See "Cards" on page 111.NOTICE: To prevent static damage to components inside your computer,discharge static electricity from your body before you touch any of your computer’selectronic components. You can do so by touching an unpainted metal surface onthe computer chassis.1 Follow the procedures in "Before You Begin" on page 97.2 Press out the securing clip at each end of the memory module connector.3 Grasp the module at the end of the board and lift up.4 Replace the PCI Express x16 card (see "Cards" on page 111).CardsCAUTION: Before you begin any of the procedures in this section, follow thesafety instructions in the Product Information Guide.NOTICE: To prevent static damage to components inside your computer,discharge static electricity from your body before you touch any of your computer’selectronic components. You can do so by touching an unpainted metal surface onthe computer chassis.Your Dell™ computer provides the following slots for PCI andPCI Express cards:• One PCI Express x16 card slot (SLOT1)• One PCI Express x1 card slot (SLOT2)• Two PCI card slots (SLOT3, SLOT4)See "System Board Components" on page 102 for card slot location.
