S olv ing Pr oble m s 915 Remove the battery.6 Wipe off the battery and put it in a safe place to dry.7 Remove the hard drive (see page 108).8 Remove the memory module(s) (see page 105).9 Open the display and place the computer right-side up across twobooks or similar props to let air circulate all around it. Let thecomputer dry for at least 24 hours in a dry area at room temperature.NOTICE: Do not use artificial means, such as a hair dryer or a fan, to speedthe drying process.CAUTION: To help prevent electrical shock, verify that thecomputer is thoroughly dry before continuing with the rest of thisprocedure.10 Ground yourself by touching one of the metal connectors on the backof the computer.11 Replace the memory module(s), the memory module cover, and thescrew(s).12 Replace the hard drive.13 Replace the module bay device and any PC Cards you removed.14 Replace the battery.15 Turn on the computer and verify that it is working properly.HINT: See "LimitedWarranties and ReturnPolicy" on page 145 forinformation on yourwarranty coverage.If the computer does not start, or if you cannot identify the damagedcomponents, contact Dell (see page 124).If You Drop or Damage Your Computer1 Save and close any open files, exit any open programs, and shut downthe computer (see page 42).2 Disconnect the AC adapter from the computer and from the electricaloutlet.3 Turn off any attached external devices, and disconnect them fromtheir power sources and then from the computer.4 Remove and reinstall the battery.5 Turn on the computer.1H018bk3.book Page 91 Monday, October 14, 2002 2:26 PM
