The computer recognizes most PC Cards and automatically loads the appropriate device driver. If theconfiguration program tells you to load the manufacturer's drivers, use the floppy disk or CD that came withthe PC Card.Removing a PC Card or BlankNOTICE: Use the PC Card configuration utility on the taskbar to select a card and stop it fromfunctioning before you remove it from the computer. If you do not stop the card in the configurationutility, you could lose data. Do not attempt to eject a card by pulling its cable, if one is attached.For a push-button latch, press the latch and gently remove the card or blank. (For some push-buttonlatches, you must press the latch twice: once to pop the latch out, and then a second time to pop the cardout.)For a rotating latch:Rotate the latch outward.1.Press in on the end of the latch.2.Gently remove the card.3.Save a blank to use when no PC Card is installed in a slot. Blanks protect unused slots from dust and otherparticles.
