Click the link of a specific driver or utility to display information about the driver or utility that youwant to install.5.Click the Install button (if present) to begin installing the driver or utility. At the welcome screen,follow the screen prompts to complete the installation.6.If no Install button is present, automatic installation is not an option. For installation instructions,either see the appropriate instructions in the following subsections, or click Extract, follow theextracting instructions, and read the readme file.If instructed to navigate to the driver files, click the CD directory on the driver information window todisplay the files associated with that driver.Manually Reinstalling Drivers for Windows 2000NOTE: If you are reinstalling an infrared driver, you must first enable the infrared sensor in thesystem setup program before continuing with the driver installation.After extracting the driver files to your hard drive as described previously, click the Start button, pointto Settings, and click Control Panel.1.Double-click the System icon.2.Click the Hardware tab.3.Click Device Manager.4.Double-click the type of device for which you are installing the driver (for example, Modems orInfrared devices).5.Double-click the name of the device.6.Click the Driver tab and click Update Driver.7.Click Next.8.Ensure that Search for a suitable driver for my device (recommended) is selected, and then clickNext.9.Ensure that the Specify a location check box is checked and that all other check boxes areunchecked, and click Next.10.Click Browse to browse to the location to which you previously extracted the driver files.11.When the name of the appropriate driver appears, click Next.12.Click Finish and restart your computer.13.NOTE: If you are reinstalling an infrared driver, you must first enable the infrared sensor in thesystem setup program before continuing with the driver installation.Manually Reinstalling Drivers for Windows XP1.
