6. For a 3.5–inch hard drive, remove the screws that secure the hard drive to the hard-drive bracket. Slide the harddrive from the hard-drive bracket.Installing the Hard Drive1. For a 3.5–inch hard drive, slide the hard drive into the hard-drive bracket. Tighten the screws that secure the harddrive to the hard-drive bracket.2. For a 2.5–inch hard drive, tighten the screws that secure the hard-drive case to the hard drive. Slide the hard driveinto the hard-drive bracket. Tighten the screws that secure the hard drive to the hard-drive bracket.3. Align and place the hard-drive bracket on the computer. Tighten the screw that secures the hard-drive bracket tothe system board.4. Connect the hard drive cables to the hard drive. Thread the cables into the notches on the hard-drive bracket.5. Install:a) VESA mount bracketb) back coverc) VESA stand6. Follow the procedures inAfter Working Inside Your Computer.Removing the Intrusion Switch1. Follow the procedures inBefore Working Inside Your Computer.2. Remove the:a) VESA standb) back coverc) VESA mount bracketd) system-board shield21
