a) VESA standb) back coverc) VESA mount bracketd) touchscreen boarde) system-board shieldf) input/output board shieldg) WLAN cardh) optical drivei) hard drivej) intrusion switchk) power button boardl) converter boardm) processor fann) power supply unito) heat-sink assemblyp) power-supply fanq) system boardr) display panel3. Disconnect the camera cable from the connector on the camera module. Remove the screws that secure thecamera to the display panel. Remove the camera module from the display panel.Installing the Camera1. Align the camera module to its slot on the display panel.2. Tighten the screws to secure the camera module to the display panel.3. Connect the camera cable to the connector.4. Install:a) display panelb) system boardc) power-supply fan43
