Option Description• Disabled — The internal LAN is off and not visible top the operating system.• Enabled — The internal LAN is enabled.• Enabled w/PXE (selected by default) — The internal LAN is enabled (withPXE boot).• Enabled w/ImageServer — The internal LAN is enabled (with ImageServerboot).SATA Operation This option configures the operating mode of the integrated SATA hard drivecontroller.• Disabled — SATA controllers are hidden.• ATA — SATA is configured for ATA mode.• AHCI (selected by default) — SATA is configured for AHCI.Drives This option lets you enable or disable various drives on board. By default the optionsare enabled.• SATA-0• SATA-1SMART Reporting This field controls if the hard drive errors for the integrated drives are reportedduring system startup. This technology is part of the SMART (Self MonitoringAnalysis and Reporting Technology) specification.• Enable SMART Reporting - This option is disabled by default.USB Configuration This field configures the integrated USB controller. If Boot Support is enabled, thesystem is allowed to boot any type of USB mass storage devices (HDD, memory key,floppy).If USB port is enabled, device attached to this port is enabled and available foroperation system.If USB port is disabled, the operation system cannot see any device attached to thisport.• Enable Boot Support• Enable Front/Rear Dual USB 3.0 Ports• Enable Rear Quad USB 2.0 Ports (2x2.0)Audio The field allows you to enable the audio.Enable AudioMiscellaneous Devices Allows you to enable or disable various on-board devices.• Enable/Disable Microphone• Enable/Disable Camera• Enable/Disable Media Card56