Dell OptiPlex 9010 Owner's Manual

Also see for OPTIPLEX 9010 ALL-IN-ONE: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

Option Description• BluetoothTable 22. MaintenanceOption DescriptionService Tag Displays the service tag of your computer.Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This optionis not set by default.SERR Messages Controls the SERR message mechanism. Some graphics cards require that the SERRmessage mechanism be disabled.• Enable SERR Messages (selected by default)Table 23. Image ServerOption DescriptionLookup Method Specifies how the ImageServer looks up the server address.• Static IP• DNS (selected by default)NOTE: This field is only relevant when the Integrated NIC control in the SystemConfiguration group is set to Enabled with ImageServer.ImageServer IP Displays the primary static IP address of the ImageServer with which the clientsoftware communicates. The default IP address is 255.255.255.255.NOTE: This field is only relevant when the Integrated NIC control in the SystemConfiguration group is set to Enabled with ImageServer and when LookupMethod is set to Static IP.ImageServer Port Allows you to specify the primary IP port of the ImageServer, which is used by theclient to communicate. The default IP port is 06910.NOTE: This field is only relevant when the Integrated NIC control in the SystemConfiguration group is set to Enabled with ImageServer.Client DHCP Specifies how the client obtains the IP address.• Static IP• DHCP (selected by default)NOTE: This field is only relevant when the Integrated NIC control in the SystemConfiguration group is set to Enabled with ImageServer.Client IP Displays the static IP address of the client. The default IP address is 255.255.255.255.NOTE: This field is only relevant when the Integrated NIC control in the SystemConfiguration group is set to Enabled with ImageServer and when Client DHCP isset to Static IP.62