Installing the Speakers1. Place and align the speakers on the computer. Tighten the screws to secure the speaker to the chassis.2. Thread the cables on the notches. Connect the right and left speaker cables to the connector on the system board.3. Install:a) system-board shieldb) VESA mount bracketc) back coverd) VESA stand4. Follow the procedures inAfter Working Inside Your Computer.Removing the System Board1. Follow the procedures inBefore Working Inside Your Computer.2. Remove the:a) VESA standb) back coverc) VESA mount bracketd) system-board shielde) memoryf) optical driveg) hard driveh) heat-sink assemblyi) power supply unitj) input/output board shieldk) converter boardl) power-supply fan3. Disconnect any cables connected to the system board.4. Remove the screws that secure the system board to the computer.33
