Dell OptiPlex 9010 Owner's Manual

Also see for OPTIPLEX 9010 ALL-IN-ONE: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

Option Description• Trusted Execution - This option is disabled by default.Table 9. WirelessOption DescriptionWireless Switch This option determines which wireless device can be controlled by the WirelessSwitch.• WWAN• WLAN• BluetoothWireless Device Enable This option allows enabling/disabling of internal wireless devices.• WWAN• WLAN• BluetoothTable 10. MaintenanceOption DescriptionService Tag Displays the service tag of your computer.Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This optionis not set by default.SERR Messages Controls the SERR message mechanism. Some graphics cards require that the SERRmessage mechanism be disabled.• Enable SERR Messages (selected by default)Table 11. Image ServerOption DescriptionLookup Method Specifies how the ImageServer looks up the server address.• Static IP• DNS (selected by default)NOTE: This field is only relevant when the Integrated NIC control in the SystemConfiguration group is set to Enabled with ImageServer.ImageServer IP Displays the primary static IP address of the ImageServer with which the clientsoftware communicates. The default IP address is 255.255.255.255.NOTE: This field is only relevant when the Integrated NIC control in the SystemConfiguration group is set to Enabled with ImageServer and when LookupMethod is set to Static IP.53