118 Configuring System Informationw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Working with Remote Server Logs Using the CLI CommandsThe following table summarizes the equivqlent CLI command for working with remote server logs.The following is an example of the CLI commands:Table 6-25. Remote Log Server CLI CommandsCLI Command Descriptionlogging (ip-address | hostname)[port port] [severity level] [facilityfacility] description text]Logs messages to a remote server.no logging Deletes a syslog server.show logging Displays the state of logging and the syslogmessages.console> enableconsole# configureconsole (config) # logging 10.1.1.1 severity criticalConsole# show loggingLogging is enabled.Console Logging: Level debug. Console Messages: 5 Dropped.Buffer Logging: Level debug. Buffer Messages: 16 Logged, 16Displayed, 200 Max.File Logging: Level error. File Messages: 0 Logged, 209 Dropped.SysLog server 31.1.1.2 Logging: error. Messages: 22 Dropped.SysLog server 5.2.2.2 Logging: info. Messages: 0 Dropped.SysLog server 10.2.2.2 Logging: critical. Messages: 21 Dropped.SysLog server 10.1.1.1 Logging: critical. Messages: 0 Dropped.1 messages were not logged03-Mar-2004 12:02:03 :%LINK-I-Up: g103-Mar-2004 12:02:01 :%LINK-W-Down: g203-Mar-2004 12:02:01 :%LINK-I-Up: g3
