Configuring Device Information 275Each Aggregated Link has an Aggregated Link Port Type, including Gigabit Ethernet ports. Portscan be added to an Aggregated Link only if they are the same port type. When ports are removedfrom an Aggregated Links, the ports revert to the original port settings. To open the LinkAggregation page, click Switch→Link Aggregation in the tree view.Defining LACP ParametersThe LACP Parameters page contains fields for configuring LACP LAGs. Aggregate ports can belinked into link-aggregation port-groups. Each group is comprised of ports with the same speed.Aggregated Links can be manually setup or automatically established by enabling Link AggregationControl Protocol (LACP) on the relevant links. To open the LACP Parameters page, click Switch→Link Aggregation→LACP Parameters in the tree view.Figure 7-108. LACP ParametersLACP System Priority (1-65535) — The LACP priority value for global settings. The possiblerange is 1- 65535. The default value is 1.Select a Port — The port number to which timeout and priority values are assigned.LACP Port Priority (1-65535) — LACP priority value for the port.LACP Timeout — Administrative LACP timeout. The possible field values are:Short — Specifies a short timeout value.Long — Specifies a long timeout value.
