Configuring System Information 175Defining RADIUS Servers Using CLI CommandsThe following table summarizes the equivalent CLI commands for setting fields displayed in theRADIUS Settings page.The following is an example of the CLI commands:Table 6-42. RADIUS Settings CLI CommandsCLI Command Descriptionradius-server timeout timeout Sets the default interval for which a device waitsfor a server host to reply.radius-server retransmitretriesSpecifies the default number of times thesoftware searches the list of RADIUS server hosts.radius-server deadtimedeadtimeConfigures unavailable default servers to beskipped.radius-server key [key-string] Sets the default authentication and encryptionkey for all RADIUS communications between thedevice and the RADIUS environment.radius-server host {ip-address| hostname} [auth-portauth-port-number] [timeouttimeout] [retransmit retries][deadtime deadtime] [keykey-string] [source source][priority priority] [usagetype]Specifies a RADIUS server host and any non-default settings.show radius-servers Displays the RADIUS server settings.Console (config)# radius-server timeout 5Console (config)# radius-server retransmit 5Console (config)# radius-server deadtime 10Console (config)# radius-server key dell-serverConsole (config)# radius-server host 196.210.100.1 auth-port1645 timeout 20
