Using Dell OpenManage Switch Administrator 71console#To list the Privileged EXEC commands, type a question mark at the command prompt andpress .To return from Privileged EXEC Mode to User EXEC Mode use any of the followingcommands: disable, exit/end, or .The following example illustrates accessing privileged EXEC mode and then returning to the UserEXEC mode:console>enableEnter Password: ******console#console#disableconsole>Use the exit command to move back to a previous mode. For example, from InterfaceConfiguration mode to Global Configuration mode, and from Global Configuration mode toPrivileged EXEC mode.Global Configuration ModeGlobal Configuration commands apply to system features, rather than a specific protocol orinterface.To access Global Configuration mode, at the Privileged EXEC Mode prompt, type configureand press . The Global Configuration Mode displays as the device host name followed by(config) and the pound sign #.console(config)#To list the Global Configuration commands, enter a question mark at the command prompt.To return from Global Configuration mode to Privileged EXEC mode, type the exit command oruse the command.The following example illustrates how to access Global Configuration Mode and return back to thePrivileged EXEC Mode:console#console#configureconsole(config)#exitconsole#
