58 Starting and Configuring the Devicew w w . d e l l . c o m | s u p p o r t . d e l l . c o m • When initially logging onto a device through a SSH session, enter jones at the passwordprompt.• When changing a device’s mode to enable, enter jones.Configuring an Initial HTTP PasswordTo configure an initial HTTP password, enter the following commands:console(config)# ip http authentication localconsole(config)# username admin password user1 level 15Configuring an Initial HTTPS PasswordTo configure an initial HTTPS password, enter the following commands:console(config)# ip https authentication localconsole(config)# username admin password user1 level 15Enter the following commands once when configuring to use a terminal, a Telnet, or an SSHsession in order to use an HTTPS session.NOTE: In the Web browser enable SSL 2.0 or greater for the page content to be displayed.console(config)# crypto certificate generate key_generateconsole(config)# ip https serverWhen initially enabling an http or https session, enter admin for user name and user1 forpassword.NOTE: Http and Https services require level 15 access and connect directly to the configuration levelaccess.Startup ProceduresStartup Menu ProceduresThe procedures called from the Startup menu cover software download, flash handling andpassword recovery. The diagnostics procedures are for use by technical support personnel only andare not disclosed in the document.The Startup menu can be entered when booting the device – a user input must be enteredimmediately after the POST test.To enter the Startup menu:1 Turn the power on and watch for the auto-boot message.******************************************************************* SYSTEM RESET *****************
