300 802.1x CommandsFILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell ContaxCLI\files\802.1X.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LYdot1x timeout quiet-periodUse the dot1x timeout quiet-period Interface Configuration (Ethernet)mode command to set the time interval that the device remains in a quietstate following a failed authentication exchange (for example, the clientprovided an invalid password). Use the no form of this command to restorethe default configuration.Syntaxdot1x timeout quiet-periodsecondsno dot1x timeout quiet-periodParametersseconds—Specifies the time interval in seconds that the device remains in aquiet state following a failed authentication exchange with the client. (Range:0–65535 seconds)Default ConfigurationThe default quiet period is 60 seconds.Command ModeInterface Configuration (Ethernet) modeUser GuidelinesDuring the quiet period, the device does not accept or initiate authenticationrequests.The default value of this command should only be changed to adjust tounusual circumstances, such as unreliable links or specific behavioralproblems with certain clients and authentication servers.To provide faster response time to the user, a smaller number than the defaultvalue should be entered.ExampleThe following example sets the time interval that the device remains in thequiet state following a failed authentication exchange to 3600 seconds.
