390 Address Table CommandsFILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell ContaxCLI\files\Address_Table.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY• port-channel port-channel-list—Specifies a list of port channels. Separatenonconsecutive port-channels with a comma and no spaces. Use a hyphento designate a range of port channels.Default ConfigurationNo forbidden addresses are defined.Command ModeInterface Configuration (VLAN) modeUser GuidelinesBefore defining forbidden ports, the multicast group should be registered.You can execute the command before the VLAN is created.ExampleThe following example forbids MAC address 0100.5e02.0203 on port 2/9within VLAN 8.Console(config)# interface vlan 8Console(config-if)# bridge multicast address 0100.5e.02.0203Console(config-if)# bridge multicast forbidden address0100.5e02.0203 add gi1/0/9bridge multicast unregisteredUse the bridge multicast unregistered Interface Configuration (Ethernet,Port-Channel) mode command to configure the forwarding state ofunregistered multicast addresses. Use the no form of this command to restorethe default configuration.Syntaxbridge multicast unregistered{forwarding | filtering}no bridge multicast unregisteredParameters• forwarding—Forwards unregistered multicast packets.
