Quality of Service (QoS) Commands 755FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell ContaxCLI\files\QoS.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LYqos dscp-mutationUse the qos dscp-mutation Global Configuration mode command to applythe DSCP Mutation map to system DSCP trusted ports. Use the no form ofthis command to restore the trusted port with no DSCP mutation.Syntaxqos dscp-mutationno qos dscp-mutationCommand ModeGlobal Configuration mode.User GuidelinesApply the DSCP-to-DSCP-mutation map to a port at the boundary of aQuality of Service (QoS) administrative domain. If two QoS domains havedifferent DSCP definitions, use the DSCP-to-DSCP-mutation map totranslate a set of DSCP values to match the definition of another domain.Apply the map to ingress and to DSCP-trusted ports only. Applying this mapto a port causes IP packets to be rewritten with newly mapped DSCP values atthe ingress ports. If applying the DSCP mutation map to an untrusted port,to class of service (CoS), or to an IP-precedence trusted port, the commandhas no immediate effect until the port becomes DSCP-trusted.ExampleThe following example applies the DSCP Mutation map to system DSCPtrusted ports.Console(config)# qos dscp-mutationqos map dscp-mutationUse the qos map dscp-mutation Global Configuration mode command toconfigure the DSCP to DSCP Mutation table. Use the no form of thiscommand to restore the default configuration.