272 | Installing AWMS on VMware ESX (3i v. 3.5) Dell PowerConnect W AirWave 7.2 | User GuideAWMS Post-Installation Issues on VMwareBy default, AWMS runs the Linux 'smartd' service for detecting physical disk errors using the S.M.A.R.T.protocol. However, virtual disks do not support the S.M.A.R.T. protocol, so the AWMS smartd service will fail atstartup.The service can be prevented from starting at boot by running the following commands at the AWMS commandline. Note that the first command prevents the service from starting, the last two commands remove the smartdservice from the list of services to shutdown during a reboot or a complete system shutdown.mv /etc/rc.d/rc3.d/S40smartd /etc/rc.d/rc3.d/Z40smartdmv /etc/rc.d/rc0.d/K40smartd /etc/rc.d/rc3.d/Z40smartdmv /etc/rc.d/rc6.d/K40smartd /etc/rc.d/rc3.d/Z40smartdTo install VMware Tools on AWMS, perform these steps:1. From the VMware Infrastructure Client, select Inventory > Virtual Machine > Install/Upgrade VMwareTools.2. At the AWMS console type mkdir /media/cdrom.3. Then type mount /dev/cdrom /media/cdrom.4. Next, type cd /tmp/; tar -xvzf /media/cdrom/VMwareTools-3.5.0-67921.tar.gz\.The VMware Tools filename may be different, depending on the version of VMware install ed.5. Run the VMware Tools setup and install script by typing the following statement: /tmp/vmware-toolsdistrib/vmware-install.pl.6. During the text-based VMware Tools install, select all default options.7. Reboot the virtual machine once the VMware Tools install is complete.NOTE: Desktop environments such as X Windows, GNOME, and KDE, that you will need to use for VMware tools installationwill no longer work once you have AWMS installed.
