158 | Creating and Using Templates Dell PowerConnect W-AirWave | Version 7.3no bridge-group 1 source-learningno bridge-group 1 unicast-floodingno ip addressno ip route-cacherts threshold 2312speed basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 36.0 48.0 54.0ssid decibel-ios-aauthentication openguest-modestation-role root%ENDIF%Configuring Cisco Catalyst Switch TemplatesCisco Catalyst Switch templates are configured much like Cisco IOS templates with the addition of theinterfaces and switch_command (for stacked switches) variables. Interfaces can be configured on the DeviceInterface pages, as shown in “Configuring Device Interfaces for Switches” on page 138. You can import interfaceinformation as described in this section or by fetching a template from that device, as described in “ConfiguringGeneral Templates” on page 151.Configuring Symbol Controller / HP WESM TemplatesThis section describes the configuration of templates for Symbol controllers and HP WESM devices.Symbol controllers (RFS x000, 5100 and 2000) can be configured in AMP using templates. AMP supports Symbolthin AP firmware upgrades from the controller’s manage page.A sample running-configuration file template is provided in this topic for reference. A template can be fetchedfrom a model device using the Cisco IOS device procedure described in “Configuring Cisco IOS Templates” onpage 156. Cisco IOS template directives such as ignore_and_do_not_push can also be applied to Symboltemplates.Certain parameters such as hostname and location are turned into variables with the % tags so that device-specific values can be read from the individual manage pages and inserted into the template. They are listed inAvailable Variable boxes on the right-hand side of the template fields.Certain settings have integrated variables, including ap-license and adoption-preference-id. The radiopreamble has been template-integrated as well. An option on the Group > Templates page reboots the deviceafter pushing a configuration to it.A sample Symbol controller partial template is included below for reference.!! configuration of RFS4000 version 4.2.1.0-005R!version 1.4!!aaa authentication login default local noneservice prompt crash-info!network-element-id RFS4000!username admin password 1 5baa61e4c9b93f3f0682250b6cf8331b7ee68fd8NOTE: Just one template is used for any type of Cisco IOS device, and another is used for any type of Catalyst Switch regardless ofindividual model.
