194 | Performing Daily Administration in AirWave Dell PowerConnect W-AirWave | Version 7.3Cipher Displays WEP with keys. This data is also displayed in the User Session report in the Session Data By Usersection.ConnectionMode The Radio mode used by the user to associate to the AP for 802.11n clients.Device Type The type of device determined by AMP Setup > Device Type Setup rules.Duration The length of time the MAC address has been associated.EAP Supplicant The party being authenticated in the Extensible Authentication Protocol.Forward Mode Forwarding mode for the port: Bridge, Tunnel, or Split Tunnel.Group The group containing the AP that the user is associated with.Guest User Specifies whether the user is a guest.Interface The interface on the device to which the user is connected.LAN Hostname The LAN hostname of the user MAC.LAN IP Address The IP assigned to the user MAC. AMP gathers it from the association table of APs.Location If a value appears here, the location of this user’s client has been mapped on VisualRF. Select the location toopen a new VisualRF Floor Plan Location window.MAC Address The radio MAC address of the user associated to APs as a link to the Users > Detail page for this user.Manufacturer The manufacturer of the user’s device.Model The model of the user’s device.Name The product of the user’s device.Network Chipset The chipset indicates the functions the device was designed to perform.Network Driver Driver name or other information.Notes Free notes about the user.OS The device’s operating system type.OS Detail Additional information on the operating system such as version numbers.Phone Number Contact number for the user.Role Specifies the role that an Dell PowerConnect W controller assigned to the connected user, such as“employee”.Serial Number Serial number of the device.Service End Ending timestamp of the device usage.Service Start Beginning timestamp of the device usage.Sig. Qual. The average signal quality the user experienced.SSID The SSID with which the user is associated.TunneledController If a user is connected to an Aruba Mobility Switch, indicates which controller the user is authenticated to.Username Displays the name of the user associated to the AP. AMP gathers this data from device traps, SNMP polling,or RADIUS accounting. Usernames appear in italics when a username for that MAC address has been storedin the database from a previous association, but AMP is not getting a username for the current association.This may indicate that the user has not yet been authenticated for this session or AMP may not be getting ausername from an external source.Table 114 Users > Connected Table Columns and Links (Alphabetical) (Continued)Field Description
