Dell PowerConnect W-AirWave | User Guide Using VisualRF | 281 “Automatically Provisioning APs onto a Floor Plan” on page 287 “Tweaking a Planning Region” on page 288 “Printing a Bill of Materials Report” on page 289Creating a New CampusFloors are associated with a building and buildings are associated with a campus. In order to create a new floor,you must first create a campus and building.To create and place your campus, follow these steps:1. Navigate to VisualRF > Floor Plans.2. Select the Add Campus button, located above the floor plan. The Create New Campus window, illustrated inFigure 226, appears.3. Enter the following campus information: Name of the campus User Transmit Power - used in auto placement of access points onto floors within this campus. The rangeis 30mW to 100mW. Desired Data Rate - used in auto placement of access points onto floors within this campus. The range is 6to 200 mbps.Figure 226 Create New Campus window4. Select OK to save. You will see a new Campus icon appear on the campus canvas. (AMP ships with a defaultcampus and building.)5. Add appropriate network geographical background or upload a personalized image by right-clicking on thebackground. Set Map - allows you to browse with the included maps. Custom - launches the image upload wizard documented in “Importing a Floor Plan” on page 283.6. Drag the new Campus icon to the appropriate location on the map background.NOTE: Buildings and floors inherit transmit power and data rate from the campus.NOTE: QuickView automatically saves background map images, campus locations, building locations, and building types
