Installing the PCIe mezzanine cardPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.NOTE: You must remove the PCIe mezzanine card to replace a faulty PCIe mezzanine card.1. Ensure that you read the Safety instructions.2. Follow the procedure listed in Before working inside your system.3. If connected, disconnect all external storage devices.4. If connected, disconnect all USB devices.5. Remove the SSD cage.6. Remove the PCIe mezzanine card.7. Keep the Phillips #2 screwdriver ready.Steps1. To install the PCIe mezzanine card:a. Place the SSD cage upside down with the USB ports to your right.b. Slide the PCIe mezzanine card on to the SSD cage.c. Secure the card in place with the screws.d. Install the PCIe mezzanine card bridge.CAUTION: To prevent damage to the PCIe mezzanine card, you must hold the card onlyby its edges.2. To install the SSD cage base cover :a. Slide the SSD cage base cover into place.b. Secure the SSD cage base cover to the SSD cage.3. Align the guide slots on the SSD cage with the guide pins on the chassis.4. Press down the SSD cage till the connectors on the SSD cage completely engage with thecorresponding connectors on the system board.Next steps1. Install the SSD cage.2. If applicable, reconnect the disconnected storage devices.3. If applicable, reconnect the disconnected USB devices.4. Follow the procedure listed in After working inside your system.Related LinksRemoving the SSD cageRemoving the PCIe mezzanine cardInstalling the SSD cage50
