Dell PowerEdge FC430 Owner's Manual

Also see for PowerEdge FC430: Getting Started With Your System Owner's manual

Contents

Dell PowerEdge FC430 Owner's Manual Manual pdf 61 page image

Figure 17. Removing and installing the 140 W heat sink1. screw hole (6) 2. heat sink3. processor socket (2)Next steps1. Remove the processor.Related LinksRemoving the cooling shroudRemoving a processorRemoving a processorPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should beperformed only by Dell certified service technicians.WARNING: The processor will be hot to touch for some time after the system has been powereddown. Allow the processor to cool before removing it.CAUTION: The processor is held in its socket under strong pressure. Be aware that the releaselever can spring up suddenly if not firmly grasped.61