Dell PowerEdge FC430 Owner's Manual

Also see for PowerEdge FC430: Getting Started With Your System Owner's manual

Contents

Dell PowerEdge FC430 Owner's Manual Manual pdf 58 page image

Figure 15. Removing and installing the LOM riser card1. LOM riser card 2. screw (2)3. standoff (2) 4. connector on the system boardNext steps1. Install the LOM riser card.2. Follow the procedure listed in After working inside your system.Related LinksInstalling the LOM riser cardInstalling the LOM riser cardPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.NOTE: You must remove the LOM riser card to replace a faulty LOM riser card or service othercomponents inside the system.1. Ensure that you read the Safety instructions.2. Follow the procedure listed in Before working inside your system.3. Keep the Phillips #2 screwdriver ready.58