Dell PowerEdge M630 Owner's Manual

Also see for PowerEdge M630: Owner's manual Owner's manual Owner's manual Getting started Getting started

Contents

Dell PowerEdge M630 Owner's Manual Manual pdf 109 page image

109Figure 60. Installing the TPM1. TPM 2. TPM connector3. slot on the TPM connector 4. plastic bolt5.Next stepsslot on the system board1. Install the systemboard.2. Followthe procedure listed inthe After working inside your system section.Related linksSafety instructionsSystem board connectorsInitializing the TPM for BitLocker usersInitialize the TPM.For more information about initializing the TPM, see ht tp: //technet.microsoft.com/en-us/library/cc753140.asp x.The TPM Status changes to Enabled, Activated.Initializing the TPM for TXT users1. While booting your system, press F2to enter System Setup.2. On the System Setup Main Menu screen, click System BIOS→System Security Settings.3. From the TPM Security option, select On with Pre-boot Measurements.4. From the TPM Command option, select Activate.5. Save the settings.6. Restart your system.7. Enter System Setup again.8. On the System Setup Main Menu screen, click System BIOS→System Security Settings.9. From the Intel TXT option, select On.