46Dell Lifecycle ControllerDell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment,configuration, update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell systemembedded Unified Extensible Firmware Interface (UEFI) applications.Related linksEmbedded system managementEmbedded system managementThe Dell Lifecycle Controller provides advanced embedded systems management throughout the system’s lifecycle. The DellLifecycle Controller can be started during the boot sequence and can function independently of the operating system.NOTE: Certain platform configurations may not support the full set of features provided by the Dell Lifecycle Controller.Formoreinformationaboutsettingupthe Dell LifecycleController,configuringhardwareandfirmware, anddeployingtheoperatingsystem, see the Dell Lifecycle Controller documentation at Dell.com/idracmanuals.Related linksDell Lifecycle ControllerBoot ManagerThe Boot Manager screen enables you to select boot options and diagnostic utilities.Related linksBoot Manager main menuSystem BIOSViewing Boot ManagerViewing Boot ManagerTo enter Boot Manager:1. Turn on, or restart your system.2. Press F11 when you see the following message:F11 = Boot ManagerIf your operating system begins to load beforeyoupress F11, allow the system to complete the booting, andthen restart yoursystem and tryagain.Related linksBoot ManagerBoot Manager main menuBoot Manager main menuMenu item DescriptionContinue NormalBootOne-shot BootMenuLaunch SystemSetupThe system attempts to boot to devices starting with the first item in the boot order. If the boot attemptfails, the system continues with the next item in the boot order until the boot is successful or no more bootoptions are found.Enables you to access boot menu, where you can select a one-time boot device to boot from.Enables you to access System Setup.
