Dell PowerEdge R610 Hardware Owner's Manual

Also see for PowerEdge R610: Manual Installation Update Installation instructions Technical guide

Contents

Dell PowerEdge R610 Hardware Owner's Manual Manual pdf 108 page image

108 Installing System Components3 Close the system. See "Closing the System."Removing the Plastic Fan Guide1 Turn off the system, including any attached peripherals, and disconnectthe system from its electrical outlet.2 Open the system. See "Opening the System."3 If necessary, remove the fan bracket. See "Removing the Fan Assembly"and place the fan assembly on a flat surface.4 Remove the fan guide by toggling the two small pegs on the plastic guideout of the two holes in the fan assembly. For the location of the fan guideand latches see Figure 3-15.Replacing the Plastic Fan Guide1 Turn off the system, including any attached peripherals, and disconnectthe system from its electrical outlet.2 Open the system. See "Opening the System."3 If necessary, remove the fan bracket. See "Removing the Fan Assembly"and place the fan assembly on a flat surface.4 Replace the guide by aligning the 2 small pegs on the guide with the twoholes in the fan bracket. See Figure 3-15.5 Replace the fan bracket. See "Replacing the Fan Assembly."6 Close the system. See "Closing the System."7 Reconnect the system and peripherals to their power sources, and turnthem on.Optical DriveAn optional slimline DVD or DVD-RW optical drive slides into the front paneland connects to the SATA controller on the system board.