Installing System Components 97Removing the Internal SD Module CardCAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and simple repairs as authorized in yourproduct documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized by Dell is not coveredby your warranty. Read and follow the safety instructions that came with theproduct.1 Turn off the system, including any attached peripherals, and disconnectthe system from the electrical outlet.2 Open the system. See "Opening the System."3 Disconnect the internal SD module cable from the module. SeeFigure 3-10.4 Lift upwards on the latch securing the internal SD module card tray to thechassis, then lift the tray out of the chassis. See Figure 3-10.Internal SD Flash CardCAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and simple repairs as authorized in yourproduct documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized by Dell is not coveredby your warranty. Read and follow the safety instructions that came with theproduct.The optional SD Flash Card on the Internal SD module supports anembedded hypervisor for virtualization.Installing an Internal SD Flash Card1 Turn off the system, including any attached peripherals, and disconnectthe system from its electrical outlet.2 Open the system. See "Opening the System."3 Locate the SD card connector on the internal SD module (seeFigure 3-10).4 With the label side facing up, insert the contact-pin end of the SD cardinto the card slot on the module. See Figure 3-10.NOTE: The slot is keyed to ensure correct insertion of the card.
