Next steps1. Install the expansion card holder.2. Install the cooling shroud.3. Follow the procedure listed in After working inside your system.Related LinksRemoving the cooling shroudRemoving the expansion card holderInstalling the expansion card holderInstalling the cooling shroudRemoving a GPU cardiDRAC ports card (optional)The iDRAC ports card consists of the SD vFlash card slot and an iDRAC port. The iDRAC ports card is usedfor advanced management of the system.An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the system. Itprovides persistent on-demand local storage and a custom deployment environment that allowsautomation of server configuration, scripts, and imaging. It emulates USB device(s). For more information,see the Integrated Dell Remote Access Controller User's Guide at dell.com/esmmanuals.Removing the iDRAC ports cardPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you read the Safety instructions.2. Follow the procedure listed in Before working inside your system.3. Keep the #2 Phillips screwdriver ready.4. Remove the cooling shroud.5. Remove the internal cooling fan.Steps1. Loosen the two captive screws securing the iDRAC ports card holder to the system board.2. Pull the iDRAC ports card to disengage it from the connector and remove the card from the chassis.105
