Figure 61. Removing and installing the control-panel board for systems with cabled hard drives1. control-panel board 2. screw (3)Related LinksInstalling the control-panel boardInstalling the control-panel boardPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you read the Safety instructions.2. Keep the #2 Phillips screwdriver ready.Steps1. Align the control-panel board with the control panel.CAUTION: Take care not to damage the mylar covering the ID switch.2. Slide the control-panel board toward the front of the control panel to lock the slide tabs and screwholes into the respective slots on the control panel.3. Install the three screws to secure the control-panel board to the control panel.135
