Installing the internal hard-drive bayPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you read the Safety instructions.2. Keep the #2 Phillips screwdriver ready.Steps1. Align the internal hard-drive bay with the tabs on the chassis and slide the internal hard-drive bayinto the chassis.2. Secure the internal hard-drive bay to the chassis using the two captive screws.3. Connect the data and power cables to the hard drive(s).Next stepsFollow the procedure listed in After working inside your system.Related LinksRemoving the internal hard-drive bayRemoving a cabled hard drivePrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you read the Safety instructions.2. Keep the #2 Phillips screwdriver ready.3. Follow the procedure listed in Before working inside your system.Steps1. Remove the power and data cables from the hard drive(s) in the internal hard-drive bay.2. Remove the internal hard-drive bay.3. Remove the four screws securing the hard drive to the internal hard-drive bay.4. Remove the hard drive from the internal hard-drive bay.72
