Figure 59. Removing and installing the control panel assembly cover for system with LED panel1. tab (3) 2. control panel assembly cover3. slot (3)Related LinksRemoving the control panel assemblyPreparing a system for conversion from tower mode to rack modeInstalling the control panel assembly coverInstalling the control panel assembly coverPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.Ensure that you read the Safety instructions.Steps1. Align the three tabs on the control panel assembly cover with the slots on the control panel.2. Push the cover until the tabs lock into place.Next steps1. Install the control panel assembly.2. Follow the procedure listed in After working inside your system.Related LinksInstalling the control panel assemblyPreparing a system for conversion from tower mode to rack modeRemoving the control panel assembly cover133
