Figure 55. Removing and installing the system battery1. positive side of battery 2. socket3. To install a new system battery, hold the battery with the positive facing up and slide it under thesecuring tabs.4. Press the battery into the connector until it snaps into place.Next steps1. Install the cooling shroud.2. Follow the procedure listed in After working inside your system.3. While booting, press to enter the System Setup and ensure the battery is operating properly.4. Enter the correct time and date in the System Setup Time and Date fields.5. Exit the System Setup.Related LinksRemoving the cooling shroudInstalling the cooling shroudControl panel assemblyRemoving the control panel assemblyPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you read the Safety instructions.2. Keep the #2 Phillips screwdriver ready.129
