3. Install the control panel assembly.4. Connect the control panel cable, the LCD cable and the control panel USB cable to the systemboard.5. Follow the procedure listed in After working inside your system.Related LinksInstalling the control panel assembly coverInstalling the control panel assemblyRemoving the LCD moduleRemoving the VGA modulePrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you read the Safety instructions.2. Follow the procedure listed in Before working inside your system.3. Remove the control panel assembly.4. Remove the control panel assembly cover.StepsRelease the hooks securing the VGA module to the control panel board and remove the VGAmodule.Figure 63. Removing and installing the VGA module1. VGA module 2. control panel3. hook (2) 4. VGA connector on the control panelboardRelated LinksRemoving the control panel assembly138
