Configuration: Premium Feature—Virtual Disk Copy 171• Before the virtual disk copy begins• While the virtual disk copy has a status of In Progress• When you re-create a virtual disk copyTo set copy priority:1 In the AMW, select Virtual Disk Copy Copy Manager.The Copy Manager window is displayed.2 In the table, select one or more copy pairs.3 Select Change Copy Priority.The Change Copy Priority window is displayed.4 In the Copy priority area, select the appropriate copy priority, dependingon your system performance needs.NOTE: There are five copy priority rates available: lowest, low, medium, high,and highest. If the copy priority is set at the lowest rate, I/O activity isprioritized, and the virtual disk copy takes longer.Stopping a Virtual Disk CopyYou can stop a virtual disk copy operation that has an In Progress status, aPending status, or a Failed status. Stopping a virtual disk copy that has aFailed status clears the Needs Attention status displayed for the storage array.Keep these guidelines in mind when you stop a virtual disk copy:• To use this option, select only one copy pair in the Copy Manager.• When the virtual disk copy is stopped, all of the mapped hosts have writeaccess to the source virtual disk. If data is written to the source virtual disk,the data on the target virtual disk no longer matches the data on thesource virtual disk.To stop a virtual disk copy, complete the following steps:1 In the AMW, select Virtual Disk Copy Copy Manager.The Copy Manager window is displayed.2 Select the copy pair in the table.3 Select Copy Stop.4 Click Yes.
