Configuration: Using iSCSI 89Viewing iSCSI Statistics and Setting BaselineStatisticsTo view iSCSI statistics and set baseline statistics:1 In the AMW toolbar, select Storage Array iSCSI Statistics.The View iSCSI Statistics window is displayed.2 Select the iSCSI statistic type you want to view in the iSCSI StatisticsType area. You can select:• Ethernet MAC statistics• Ethernet TCP/IP statistics• Target (protocol) statistics3 In the Options area, select:• Raw statistics—To view the raw statistics. Raw statistics are all thestatistics that have been gathered since the RAID controller moduleswere started.• Baseline statistics—To view the baseline statistics. Baseline statisticsare point-in-time statistics that have been gathered since you set thebaseline time.After you select the statistics type and either raw or baseline statistics, thedetails of the statistics appear in the statistics tables.NOTE: You can click Save As to save the statistics that you are viewing in atext file.4 To set the baseline for the statistics:a Select Baseline statistics.b Click Set Baseline.c Confirm that you want to set the baseline statistics in the dialog thatappears.The baseline time shows the latest time you set the baseline. The samplinginterval is the difference in time from when you set the baseline until youlaunch the dialog or click Refresh.NOTE: You must first set a baseline before you can compare baselinestatistics.
